HardBreak
GitHubDiscordLinkedInX
  • HardBreak - Hardware Hacking Wiki
  • Introduction
    • How to start
    • Methodology
    • Case Study (Led to a CVE Update)
      • General Case Study
  • Hardware Hacking
    • Introduction
    • Basics
      • Tools
        • Hardware Tools
          • Essential Tools
          • Soldering Tools
          • Logic Analyzer
            • Saleae Logic Analyzer
          • Open-Source Tools
            • Bus Pirate v3.6
            • Bus Pirate 5
            • GoodFET
          • Multimeters & Oscilloscopes
          • JTAG and SWD Debuggers
            • Segger JLink
            • TI CC-Debugger
          • UART-to-TTL adapter
          • Chip readers and programmers
            • Xgecu T56
        • Software Tools
          • Binwalk
          • Firmwalker
          • flashrom
          • Ghidra
          • OpenOCD
          • Mitmrouter
      • Common Hardware Components
      • Firmware Extraction Methods
      • Ethics
    • Reconnaissance
      • Closed device
        • OSINT (search the web)
        • USB Ports / SD-card
      • Opened device
        • Board Analysis
    • Interface Interaction
      • UART
        • Identify UART
        • Connect to UART
        • Extract Firmware using UART
      • I2C
      • SPI
        • Extract Firmware using SPI
      • JTAG/SWD
        • JTAG
          • Identify JTAG
        • SWD
        • Extract Firmware using JTAG/SWD
      • VE.Direct
    • Bypassing Security
      • Voltage Glitching
        • Example: LPC1768
      • Electromagnetic Fault Injection
    • Analyze Firmware
  • Network Analysis
    • Introduction
    • Reconnaissance
    • Protocols
      • WIFI
        • WEP
        • Deauthentication Attacks
      • Application Layer
        • Proprietary Protocols
          • Parrot Anafi Drone Reverse Engineering
        • MQTT
        • CoAP
        • Web Sockets
  • Radio Hacking
    • Introduction
    • Reconnaissance
    • Protocols
      • NFC
      • RFID
    • Tools
      • RF Signal Analyzers
        • RTL-SDR
        • HackRF
      • Flipper Zero
        • NFC
        • Sub-GHz
  • Contribute
    • How to contribute
    • Gitbook - Basics
      • Markdown
      • Images & media
      • Interactive blocks
  • About
    • Impressum – Legal Notice
    • Privacy Policy
    • Datenschutzerklärung
    • License
Powered by GitBook
On this page

Was this helpful?

Edit on GitHub
  1. Hardware Hacking

Interface Interaction

You could identify potential interfaces for UART/JTAG/SWD/SPI etc.? Great! In this chapter we discuss on how to verify potential debug interface candidates and how to use them to extract data or even the complete firmware from the target device.

PreviousBoard AnalysisNextUART

Last updated 6 months ago

Was this helpful?